cv_eng.texRead-only preview
\documentclass[11pt]{article}
%\usepackage{helvet} % Default font is the helvetica postscript font
%\usepackage{newcent} % To change the default font to the new century schoolbook postscript font uncomment this line and comment the one above
%----------------------------------------------------------------------------------------
% CUSTOM PACKAGES
%----------------------------------------------------------------------------------------
\usepackage{amsmath}
\usepackage{calc}
\usepackage{hyperref}
\usepackage{enumitem}
\usepackage{fontawesome}
\usepackage[a4paper, total={6.5in, 9in}]{geometry}
\usepackage{marvosym}
\usepackage{tabularx}
\usepackage{textcomp}
%For the references
\usepackage{natbib}
\usepackage{bibentry}
%----------------------------------------------------------------------------------------
%----------------------------------------------------------------------------------------
%----------------------------------------------------------------------------------------
%----------------------------------------------------------------------------------------
% CUSTOM COMMANDS
%----------------------------------------------------------------------------------------
%Set Sans Serif fonts
\renewcommand{\familydefault}{\sfdefault}
%Avoid warning with multiple \bibentry pointing to the same item
\makeatletter
\renewcommand\bibentry[1]{\nocite{#1}{\frenchspacing
\@nameuse{BR@r@#1\@extra@b@citeb}}}
\makeatother
%----------------------------------------------------------------------------------------
%----------------------------------------------------------------------------------------
%----------------------------------------------------------------------------------------
%Pointer to bib file
\nobibliography{publications}
\begin{document}
%----------------------------------------------------------------------------------------
% Header
%----------------------------------------------------------------------------------------
\begin{center}
\large{\bf Francesco BIANCONI} \\
\emph{Curriculum vitae}\footnote{Last updated: \today}
\end{center}
\vspace{\baselineskip}
\begin{center}
\begin{small}
%\begin{tabular}{l@{\hskip 0.5in}l|l}
\begin{tabular}{ll@{\hskip 1.5cm}l}
\bf Office & \bf Home \\
Department of Engineering & Via Luigi Catanelli 54 & \Email \ \href{mailto:bianco@ieee.org}{\texttt{bianco@ieee.org}}\\
Università degli Studi di Perugia & 06135 Perugia, Italy & \faGlobe \ \url{www.bianconif.net}\\
Via Goffredo Duranti 93 &
%\Telefon \ +39 075 966 1582 ù
& \faGithub \ \href{https://github.com/bianconif}{\texttt{bianconif}} \\
06125 Perugia, Italy \\
%& \Mobilefone \ +39 347 585 9738 \\
\Telefon \ +39 075 585 3706\\
\end{tabular}
\end{small}
\end{center}
%----------------------------------------------------------------------------------------
% End of header
%----------------------------------------------------------------------------------------
\rule{\textwidth}{0.75pt}
\section*{Personal details}
Born: 17 July 1971, Perugia, Italy\\
Gender: Male \\
Citizenship: Italian
\section*{Education}
\subsection*{University degrees}
\begin{itemize}
\item Doctor of Philosophy,
\emph{Computer-aided Mechanical Design} \\
Università degli Studi di Perugia, Perugia, Italy \hfill Jan. 2001
\item Master of Engineering, \emph{Mechanical Engineering} \\
Università degli Studi di Perugia, Perugia, Italy \hfill Apr. 1997
\end{itemize}
\subsection*{Other courses}
\begin{itemize}
\item
\emph{Applied Data Science Specialization}, IBM/Coursera \hfill Jun. 2020
\end{itemize}
\section*{Languages}
\begin{itemize}
\item English: Proficient
\begin{itemize}
\item Cambridge CB CPE (grade B -- 219/230) \hfill Nov. 2021
\item Cambridge CB CAE (grade A -- 81/100) \hfill Apr. 2013
\item iBT TOEFL (104/120) \hfill Dec. 2011
\end{itemize}
\item Spanish: Advanced
\begin{itemize}
\item DELE intermediate (95/100) \hfill May 2006
\end{itemize}\textbf{}
\item Italian: Native
\end{itemize}
\section*{IT \& Programming skills}
\begin{itemize}
\item Programming languages \& VCS
\begin{itemize}
\item C, C++, Java, Python and Git
\end{itemize}
\end{itemize}
\begin{itemize}
\item Digital typesetting \& office automation
\begin{itemize}
\item Microsoft Excel, Microsoft Word and \LaTeX
\end{itemize}
\end{itemize}
\begin{itemize}
\item Scientific packages \& data visualisation tools
\begin{itemize}
\item Matlab, Mathematica and Tableau
\end{itemize}
\end{itemize}
\begin{itemize}
\item CAD/CAE
\begin{itemize}
\item Autodesk AutoCAD, Autodesk Inventor and SolidWorks
\end{itemize}
\end{itemize}
\section*{Employment}
\begin{itemize}
\item \emph{Associate professor}, Department of Engineering, Università degli Studi di Perugia, Italy \\ \mbox{} \hfill Jul. 2015--present
\item \emph{Assistant professor}, Department of Engineering, Università degli Studi di Perugia, Italy \\ \mbox{} \hfill Nov. 2000--Jun. 2015
\item \emph{CAD Engineer} (internship), Umbra Cuscinetti SpA, Foligno (Italy) \mbox{} \hfill Oct.--Nov. 1998
\item \emph{Secondary school teacher} (Textile Technologies), Istituto Professionale Statale per l’Industria e L’Artigianato, Perugia (Italy) \mbox{} \hfill Dec. 1997--Jun. 1998
\item \emph{Secondary school teacher} (Civil and Industrial Plants), Istituto Tecnico Statale per Geometri, Perugia (Italy) \mbox{} \hfill Dec. 1997--Jun. 1998
\item \emph{Secondary school teacher} (Applied Mechanics), Istituto Tecnico Industriale Statale, Foligno (Italy) \mbox{} \hfill Jun.--Jul. 1997
\end{itemize}
\section*{Visiting positions}
\begin{itemize}
\item \emph{Academic visitor}, School of Mathematics, Computer Science and Engineering; City, University of London, United Kingdom \mbox{} \hfill Sep.--Dec. 2018
\item \emph{Academic visitor}, School Electronic Engineering and Computer Science; Queen Mary, University of London, United Kingdom \mbox{} \hfill Sep.--Dec. 2015
\item \emph{Visiting research fellow}, School of Computing Sciences; University of East Anglia, United Kingdom \mbox{} \hfill Oct.--Dec. 2010
\item \emph{Visiting researcher}, School of Industrial Engineering, Department of Engineering Design; Universidade de Vigo, Spain \mbox{} \hfill Jun.--Jul. 2009
\\ \mbox{} \hfill Sep. 2007
\\ \mbox{} \hfill Sep. 2006
\\ \mbox{} \hfill Sep. 2005
\end{itemize}
\section*{Teaching}
\subsection*{Undergraduate courses}
\begin{itemize}
\item \emph{Graphical Communication for Engineering Design} (5 CFU\footnote{Stands for \emph{Credito Formativo Universitario}. This is the unit used in the Italian higher education system to measure and assess the student's work and effort. The minimum number of required credits is 180 for a Bachelor's and 120 for a Master's degree.}) + \emph{CAD} (2 CFU), Università degli Studi di Perugia, Department of Engineering, BSc Engineering Management \mbox{} \hfill 2024--present
\item \emph{Machine Drawing} (10 CFU), Università degli Studi di Perugia, Department of Engineering, BSc Mechanical Engineering \mbox{} \hfill 2021--present
\item \emph{Technical Drawing} (5 CFU) + \emph{CAD} (2 CFU), Università degli Studi di Perugia, Department of Engineering, BSc Industrial Engineering \mbox{} \hfill 2010--present
\item \emph{Computer skills} (2 CFU), Università degli Studi di Perugia, Department of Engineering, BSc Mechanical Engineering \mbox{} \hfill 2012--2022
\item \emph{Technical Drawing} (6 CFU) + \emph{Computer skills} (2 CFU), Università degli Studi di Perugia, Department of Engineering, BSc Mechanical Engineering (curriculum Engineering Management) \\ \mbox{} \hfill 2017--2021
\item \emph{Machine Drawing} (10 CFU) + \emph{Computer skills} (2 CFU), Università degli Studi di Perugia, Department of Engineering, BSc Mechanical Engineering \mbox{} \hfill 2008--2012
\item \emph{Machine Drawing} (6 CFU) Università degli Studi di Perugia, Department of Engineering, BSc Mechanical Engineering \mbox{} \hfill 2000--2007
\item \emph{Technical Drawing} (4 CFU) + \emph{Computer skills} (2 CFU) Università degli Studi di Perugia, Department of Engineering, BSc Energy Engineering and BSc Engineering Management \mbox{} \hfill 2005--2010
\item \emph{Technical Drawing} (5 CFU) Università degli Studi di Perugia, Department of Engineering, BSc Materials Engineering \mbox{} \hfill 2000--2004
\item \emph{CAD Laboratory} (2 CFU) Università degli Studi di Perugia, Department of Engineering, BSc Materials Engineering \mbox{} \hfill 2003–2005
\end{itemize}
\subsection*{Post-graduate courses}
\begin{itemize}
\item \emph{Product Design and Development} (6 CFU), Università degli Studi di Perugia, Department of Engineering, MEng Industrial Engineering \mbox{} \hfill 2009--2010
\item \emph{Design Methods of Industrial Engineering} (6 CFU), Università degli Studi di Perugia, Department of Engineering, MEng Mechanical Engineering \mbox{} \hfill 2008--2009
\end{itemize}
\subsection*{Post-master courses and continuous education}
\begin{itemize}
\item \emph{Computer-aided Design} (2,75 CFU), Università degli Studi di Perugia, Graduate Teacher Training Programme \mbox{} \hfill 2005
\item \emph{Computer-aided Design} (4 CFU), Università degli Studi di Perugia, Faculty of Engineering post-master course in Materials Engineering \mbox{} \hfill 2004
\item \emph{Technical Drawing I} (1,75 CFU), Università degli Studi di Perugia, Graduate Teacher Training Programme \mbox{} \hfill 2002
\item \emph{Technical Drawing II} (2 CFU), Università degli Studi di Perugia, Graduate Teacher Training Programme \mbox{} \hfill 2003
\end{itemize}
\subsection*{Short courses}
\begin{itemize}
\item \emph{Fundamentals of Engineering Drawing: Theory and Applications} (10h), FAIST Componenti S.p.A, Montone, Italy, \mbox{} \hfill Feb. 2011
\item \emph{Fundamentals of Pattern Recognition and Image Processing} (10h), Universidade de Vigo, Spain, Doctoral Programme in Environmental Engineering \mbox{} \hfill Jun. 2009
\item \emph{Introduction to Technical Drawing} (15h), Black \& Decker Italia, Corciano, Italy \\ \mbox{} \hfill Dec. 2008--Jan. 2009
\item \emph{Introduction to CAD/CAE} (10h), Master in Virtual Engineering, ITT s.c.a.r.l, Umbertide, Italy \\ \mbox{} \hfill 2005
\item \emph{Introduction to Object-oriented Programming in C/C++}, Università degli Studi di Perugia, Italy, Doctoral Programme in Industrial Engineering \mbox{} \hfill Apr.--May 2004
\end{itemize}
\subsection*{Teaching in Erasmus interchange programmes}
\begin{itemize}
\item \emph{Expresión Gráfica} (Technical Drawing, 6h). BSc Energy Engineering and Mining, and BSc Energy Resources and Engineering, Universidade de Vigo, Spain \hfill Dec. 2013
\item \emph{Expresión Gráfica} (Technical Drawing, 6h). BSc Engineering of Industrial Technologies, BSc Management Engineering, BSc Electrical Engineering, BSc Mechanical Engineering, BSc Industrial Automation and Electronic Engineering, and BSc Industrial Chemical Engineering, Universidade de Vigo, Spain \hfill Jan. 2012
\item \emph{Expresión Gráfica} (Technical Drawing, 8h). BSc in Industrial Engineering, Universidade de Vigo, Spain \hfill Apr. 2019
\end{itemize}
\subsection*{Talks}
\begin{itemize}
\item \emph{Behind charts: A quick detour into data visualisation}. In \emph{Topology by the River Ouse: AI, data shape and computation in Buckingham}. The University of Buckingham, Buckingham, United Kingdom (online) \hfill 27 March 2026
\item \emph{Il machine learning e il deep learning spiegati al medico nucleare} [\emph{Machine learning and deep learning explained to the nuclear medicine specialist}]. Corso \emph{Big Data, AI \& oncologia nucleare: ``Questo matrimonio s'ha da fare''? } [\emph{Short course Big data, AI \& nuclear oncology: shall we get them married?}]. The Italian Society of Nuclear Medicine, Molecular Imaging and therapy (AIMN), Rome, Italy \hfill 5~February~2026
\item \emph{Intelligenza artificiale e radiomica nella diagnostica per immagini: introduzione a strumenti e metodi} [\emph{Artificial intelligence and radiomics for diagnostic imaging: an introduction to tools and methods}]. Corso \emph{Tecniche di intelligenza artificiale nell'imaging: istruzioni per l'uso} [\emph{Short course Artificial intelligence techniques for diagnostic imaging—how to}]. Perugia Hospital, Perugia, Italy \mbox{} \hfill 7~November~2025
\item \emph{IA e radiomica: uno sguardo d'insieme su strumenti e metodi} [\emph{AI and radiomics: an overview of tools and methods}]. Corso \emph{AI e radiomica in medicina nucleare: luci ed ombre} [\emph{Short course on AI and radiomics in Nuclear Medicine: Lights and shades}]. The Italian Society of Nuclear Medicine, Molecular Imaging and therapy (AIMN), Rome, Italy \hfill 17~December~2024
\item \emph{Quale software scegliere} [\emph{Which software to choose}]. Educational session \emph{Radiomica come e perché} [\emph{Radiomics how and why}], the 16$^\text{th}$ National Congress of the Italian Society of Nuclear Medicine and Molecular Imaging (AIMN), Milan, Italy \hfill 23~June~2024
\item \emph{Intelligenza artificiale applicata all’imaging medico nucleare: estrazione e analisi di features radiomiche} [\emph{Artificial intelligence applied to Nuclear Medicine imaging: extraction and analysis of radiomics features}] (with B. Palumbo), webinar ``Evoluzione tecnologica, digital health and Nuclear Medicine'' [Technical evolution, digital health and Nuclear Medicine], Italian Society of Nuclear Medicine and Molecular Imaging (AIMN), The Health Technology Assessment (HTA) study group \hfill 26~Jan.~2024
\item \emph{A quick introduction to Radiomics}. Webinar Introduction to Radiomics for Nuclear Medicine, Italian Society of Nuclear Medicine and Molecular Imaging (AIMN), The AI-Radiomics study group \hfill 16~Jan.~2023;
\item \emph{Colour and texture descriptors for visual recognition: From the early years to convolutional networks}. Keynote lecture (online), 2$^\text{nd}$ International Conference on Computer Engineering and Science (CCES 2022), Islamic Azad University, Najafabad, Iran \hfill 20~Dec.~2022;
\item \emph{Intelligenza artificiale e radiomica: applicazioni in Medicina Nucleare} [\emph{Artificial Intelligence and Radiomics: Applications in Nuclear Medicine}] (with B. Palumbo), Memorial Dr. Fausto Chionne ``Dall'intelligenza artificiale alla medicina predittiva e di precisione: quali sviluppi in sanità'' [From artificial intelligence to personalised and predictive medicine: Developments for the healthcare system; in memory of Dr. Fausto Chionne], Città della Pieve, Italy \hfill 13~Oct.~2022
\item \emph{Intelligenza artificiale e radiomica: uno sguardo d'insieme} [\emph{Artificial intelligence and radiomics: an overview}]. Invited note at the round-table on Artificial Intelligence and Radiomics, the 15$^\text{th}$ National Congress of the Italian Society of Nuclear Medicine and Molecular Imaging (AIMN), Rimini, Italy \hfill 14~May~2022
\item \emph{Advances in modelling and analysis of the human body by computational imaging} (with G. Pascoletti). Keynote lecture (online), 2$^\text{nd}$ International Congress on Engineering Sciences and Multidisciplinary Approaches, Istanbul, Turkey \hfill 18~Sep.~2021
\item \emph{Radiomics in medical imaging: an overview}. Invited talk, IET Webinar Recent advances in Medical Image Analysis \hfill 25 Jun. 2021
\item \emph{Texture and colour descriptors for visual recognition: historical overview and applications to computer vision and robotics}. Keynote lecture (online), The 2020 International Conference on Control, Automation and Diagnosis (ICCAD’20), Paris, France \\ \mbox{} \hfill 7 Oct. 2020
\item \emph{Role of artificial intelligence techniques (automatic classifiers) in molecular imaging modalities in neurodegenerative diseases} (with B. Palumbo). Invited talk, short course in Big Data, Radiomics \& Artificial Intelligence; Italian Association for Medical Physics (AIFM), Reggio Emilia, Italy \\ \mbox{} \hfill 15-16 Dec. 2017
\item \emph{Towards a procedural model for CAD data exchange}; 5$^\text{th}$ workshop on Design Tools and Methods in Industrial Engineering, Pisa, Italy, \hfill 21-23 Mar. 2005
\item \emph{Collaborative CAD modeling and construction of augmented CAD models}; 4$^\text{th}$ workshop on Design Tools and Methods in Industrial Engineering, Erice, Italy \hfill 29 Sep.--1 Oct. 2003
\item \emph{Approaches for integration of CAD/CAM/CAE systems}; 3$^\text{rd}$ Workshop on Design Tools and Methods in Industrial Engineering, Firenze, Italy \hfill 27-28 Jun. 2002
\item \emph{Interface-based methods for data exchange among CAx systems}; 2$^\text{nd}$ Workshop on Design Tools and Methods in Industrial Engineering, Perugia, Italy \hfill 5-6 Jul. 2001
\item \emph{Collaborative design and data exchange through STL files}; 1$^\text{st}$ Workshop on Design Tools and Methods in Industrial Engineering, Parma, Italy \hfill Sep. 2000
\end{itemize}
\subsection*{Seminars}
\begin{itemize}
\item \emph{Texture and colour descriptors for visual recognition: an overview of methods applications}. Doctoral programme in Industrial and Information Engineering, Università degli Studi di Perugia, Italy \mbox{} \hfill 23~Jun.~2021
\item \emph{Hand-designed descriptors vs. pre-trained convolutional networks: a comparison of two strategies for colour texture classification}. School of Mathematics, Computer Science and Engineering; City, University of London, United Kingdom \hfill 20~Nov.~2018
\item \emph{Texture description through histograms of equivalent patterns: A unifying Framework for LBP and related methods}. School of Computing Sciences, University of East Anglia, United Kingdom \mbox{} \hfill 9~Dec.~2015
\item \emph{Texture description through histograms of equivalent patterns: A unifying Framework for LBP and related methods}. School of Electronic Engineering and Computer Science; Queen Mary, University of London, United Kingdom \hfill 22 Sep. 2015
\item \emph{Introduction to computer vision}, School of Industrial Engineering, Universidade de Vigo, Spain \\ \mbox{} \hfill 21 Jan. 2014
\item \emph{Fundamentals of pattern recognition and colour image analysis}, School of Industrial Engineering, Universidade de Vigo, Spain \hfill 27~Nov.~2012
\item \emph{Introduction to pattern recognition and computer vision with applications in the industry}, School of Industrial Engineering, Universidade de Vigo, Spain \hfill 24 Jan. 2012
\item \emph{Colour vision and pattern recognition}. School of Industrial Engineering, Universidad de Vigo, Spain \hfill 11 Jan. 2011
\item \emph{Automatic characterization of materials appearance through texture and colour analysis}. School of Computing Sciences, University of East Anglia, United Kingdom \hfill 15 Oct. 2010
\item \emph{Data exchange among CAD/CAM/CAE systems: problems and perspectives}. Università degli Studi dell’Aquila, Italy \hfill 16 Dec. 2004
\end{itemize}
\subsection*{Tutorials}
\begin{itemize}
\item \emph{Colour texture analysis and classification} (with C. Cusano and P. Napoletano), 5$^\text{th}$ Computational Colour Imaging Workshop (CCIW’17), Milan, Italy \hfill 29 Mar. 2017
\end{itemize}
\subsection*{Supervision of PhD dissertations}
\begin{itemize}
\item M.U. Khan \emph{Radiomics as a tool to differentiate benign vs. malignant lesions in different imaging modalities} Doctoral Programme in Industrial and Information Engineering, Università degli Studi di Perugia, Italy \hfill Apr. 2026
\item R. Bello-Cerezo \emph{Colour texture classification at the end of the `early' years: hand-designed descriptors or pre-trained convolutional neural networks?} Doctoral Programme in Industrial and Information Engineering, Università degli Studi di Perugia, Italy \hfill Apr. 2019
\end{itemize}
\subsection*{Supervision of BSc and MSc theses}
\begin{itemize}
\item Thirty BSc and MSc theses within the Department of Engineering, Università degli Studi di Perugia, Italy \hfill 2001--present
\item Eight MSc theses within the School of Industrial Engineering, Universidade de Vigo, Spain \\ \mbox{} \hfill 2007--2014
\end{itemize}
\section*{Administrative work}
\begin{itemize}
\item Member of the research committee, Department of Engineering, Università degli Studi di Perugia, \\ \mbox{} \hfill Nov. 2014--Nov. 2025
\item Member of the internship committee, BSc and MSc in Mechanical Engineering, Università degli Studi di Perugia \hfill Nov. 2022--present
\item Member of the quality assurance group, BSc and MSc in Mechanical Engineering, Università degli Studi di Perugia \hfill Jan. 2024--present
\item Member of the steering committee of the Doctoral Programme in Industrial and Information Engineering, Università degli Studi di Perugia \hfill 2013--present
\item Member of the steering committee of the Doctoral Programme in Industrial Engineering, Università degli Studi di Perugia \hfill 2003—2012
\end{itemize}
\section*{Research projects}
\subsection*{As principal investigator}
\begin{itemize}
\item \emph{Analisi della geometria e della tessitura di modelli piani e volumetrici: metodi ed applicazioni} (\emph{STARTLE -- Shape and Texture Analysis of planaR and volumeTric models: mEthods and applications}). Fundamental research grants, Department of Engineering, Università degli Studi di Perugia, Italy. Amount granted: € 4000,00. \hfill 2022-2024
\item \emph{Caratteristiche di forma, colore e tessitura per l’analisi di immagini piane e volumetriche: metodi ed applicazioni} (\emph{Shape, colour and texture features for the analysis of two- and three-dimensional images: methods and applications}). Fundamental research grants, Department of Engineering, Università degli Studi di Perugia, Italy. Amount granted: € 2.751,32. \hfill 2020-2021
\end{itemize}
\subsection*{As investigator/participant}
\begin{itemize}
\item \emph{MODUS-PRO MODellazione aUtomatica perSonalizzata di PRotesi e Ortesi [Automated personalised modeling of protheses and ortheses]}. Research call 2025 -- innovative research projects, Fondazione Perugia (Italy). Overall budget: € 50.000,00 \hfill 2026-2028
\item \emph{Innovation, digitalisation and sustainability for the diffused economy in Central Italy (VITALITY). Spoke 9: NANOMAT pole -- Nanostructured materials and devices}. NextGenerationEU (National Recovery and Resilience Plan -- NRRP) grant, Italian Ministry for University and Research (MUR) and the European Commission. Overall budget: € 18.482.071,99 \hfill 2024-2025
\item \emph{3D printing and digital twinning ceramic restorations for dentistry (3DCer4Dent)}. National research grants (PRIN 2022), Italian Ministry for University and Research (MUR), Italy. Amount granted: € 306.790,00 (total), 86.589,00 (Università degli Studi di Perugia) \hfill 2023-2025
\item \emph{Artificial intelligence for Earth observation}. Fundamental research grants, Department of Engineering, Università degli Studi di Perugia, Italy. Amount granted: € 3000,00. \hfill 2021-2022
\item \emph{Algoritmi classici e di Machine Learning per lo sviluppo di modelli sperimentali ``data driven'' per applicazioni robotiche e per la classificazione di prodotti industriali} (\emph{Traditional and Machine Learning algorithms for developing data-driven robotics applications and for automatic classification of industrial products}). Fundamental research grants, Department of Engineering, Università degli Studi di Perugia, Italy. Amount granted: € 5600,00. \hfill 2019-2020
\item \emph{Identificación basada en objetos de cultivos hortícolas bajo invernadero a partir de stereo imágenes del satélite WorldView-3 y series temporales de Landsat-8 -- Ref. AGL2014-56017-R} (\emph{Object-based identification of greenhouse horticultural crops through satellite stereo imagery from WorldView-3 and time series from Landsat-8}). Ministry of Economy and Competitiveness, Spain; Universidad de Almería, Spain. Amount granted: € 85.000,00. \hfill 2015-2018
\item \emph{BioMeTron: Un nuovo approccio integrato e multidisciplinare per lo studio, la gestione e la progettazioni di impianti biologici per l'energia e l'ambiente} (\emph{A new multi-disciplinary, integrated approach for studying, designing and managing biological plants for energy and the environment}). Fundamental research grants, Department of Engineering, Università degli Studi di Perugia, Italy. Amount granted: € 14.000,00. \hfill 2015-2017
\item \emph{LIFE12 ENV/IT/000411 Enhanced material recovery and environmental sustainability for small scale waste management systems}. European Commission. \hfill 2013-2018
\item \emph{GEOEYE1-WV2: Generación de datos georeferenciados de muy alta resolución a partir de imágenes de los satélites GeoEye-1 Y WorldView-2 -- ref. CTM2010-16573} (\emph{Generation of high resolution geo-referenced data from GeoEye-1 and WorldView-2 satellite images}). Ministry of Science and Education, Spain; Universidad de Almería, Spain. \hfill 2011-2013
\item \emph{EFESO: Environmental Friendly Energy from Solid Oxide Fuel Cells}. Ministry of Economic Development, Italy. Total amount granted: € 10.922.360,00 \hfill 2009-2011
\item \emph{Modeling, simulation and experimental evaluation of materials for Industrial and Civil Engineering}. Consortium for the development of the University District, Terni, Italy. Amount granted: € 73.000,00 \hfill 2007-2008
\item \emph{Sistemi innovativi per la gestione e la condivisione delle informazioni di prodotto in ambienti CAx (Innovative systems for sharing and managing product data in CAx environments)}. Ministry of Education, University and Research; PRIN programme 2005, Italy. Amount granted: € 73.000,00 \mbox{} \hfill 2007-2008
\end{itemize}
\section*{Other grants and fellowships for teaching, research and consultancy}
\begin{itemize}
\item \emph{FFABR: Finanziamento delle Attività Base di Ricerca} (\emph{Funding for Basic Activities Related to Research}). National Agency
for the Evaluation of Universities and Research Institutes, Italy. Amount: € 3000,00. \hfill 2017
\end{itemize}
\begin{itemize}
\item \emph{Introduction to Engineering Drawing: Theory and applications}. Faist Componenti S.p.A., Montone (PG), Italy. Grant type: teaching and consultancy. Amount: € 3000,00. \hfill 2018
\end{itemize}
\begin{itemize}
\item \emph{Introduction to Engineering Drawing: Theory and applications}. Faist Componenti S.p.A., Montone (PG), Italy. Grant type: teaching and consultancy. Amount: € 1500,00. \hfill 2017
\end{itemize}
\begin{itemize}
\item \emph{Introduction to Engineering Drawing: Theory and applications}. Faist Componenti S.p.A., Montone (PG), Italy. Grant type: teaching and consultancy. Amount: € 1000,00. \hfill 2016
\end{itemize}
\begin{itemize}
\item \emph{Introduction to Computer Vision}. Universidade de Vigo, Spain. Grant type: teaching. Amount: € 500,00. \hfill 2014
\end{itemize}
\begin{itemize}
\item \emph{Fundamentals of pattern recognition and colour image analysis}. Universidade de Vigo, Spain. Grant type: teaching. Amount: € 500,00. \hfill 2013
\end{itemize}
\begin{itemize}
\item \emph{Fundamentals of pattern recognition and colour image analysis}. Universidade de Vigo, Spain. Grant type: teaching. Amount: € 1200,00. \hfill 2012
\end{itemize}
\begin{itemize}
\item \emph{Colour vision and pattern recognition}. Universidade de Vigo, Spain. Grant type: teaching. Amount: € 1200,00. \hfill 2011
\end{itemize}
\begin{itemize}
\item \emph{Digital image processing and pattern recognition}. Universidade de Vigo, Spain. Grant type: teaching. Amount: € 1800,00. \hfill 2009
\end{itemize}
\begin{itemize}
\item \emph{Introduction to Engineering drawing, materials and manufacturing processes}. Black \& Decker Italia S.p.A., Corciano (PG), Italy. Grant type: teaching and consultancy. Amount: € 6000,00. \\ \mbox{} \hfill 2008-2009
\end{itemize}
\begin{itemize}
\item \emph{Characterization of the visual appearance of ornamental stone through combination of classifiers}. Universidade de Vigo, Spain. Grant type: visiting fellowship. Amount: € 1200,00. \hfill 2006
\end{itemize}
\begin{itemize}
\item \emph{Characterization of the visual appearance of natural stones (marble and granite) through image processing and artificial intelligence}. National Research Council, Italy. Grant type: Short-term mobility fellowship. Amount: € 1.787,87. \hfill 2005
\end{itemize}
\begin{itemize}
\item \emph{Design and optimisation of shelters}. O.M.C. Srl, Passignano (PG), Italy. Grant type: consultancy. Amount: € 5.760,00. \hfill 2005
\end{itemize}
\section*{Editorial work}
\begin{itemize}
\item Guest Editor of the Special Issue `Radiomics in cancer imaging: Theory and applications in solid tumours', \emph{Cancers} (e-ISSN 2072-6694) \hfill closing Oct. 2025
\item Academic Editor for \emph{PLOS One} (e-ISSN: 1932-6203) \hfill Jun. 2020--Mar.~2024
\item Academic Editor for \emph{Applied Sciences} (e-ISSN: 2076-3417) \hfill Nov.~ 2019--Feb.~2022
\item Guest Editor of the Special Issue `Artificial intelligence in Image-Based Diagnostics of Oncological and Neurological Disorders 2.0', \emph{Diagnostics} (e-ISSN 2075-4418) \hfill closed Dec. 2023
\item Managing Guest Editor of the Virtual Special Issue `Visual dEscriptors for TexturE Recognition: from Gabor to deep leArNing (VETERAN)', \emph{Pattern Recognition Letters} (ISSN: 0167-8655) \\ \mbox{} \hfill closed Sep. 2022
\item Guest Editor of the Special Issue `Automated Product Inspection for Smart Manufacturing', \emph{Applied Sciences} (e-ISSN: 2076-3417) \hfill closed~Aug.~2022
\item Guest Editor of the Special Issue `Artificial intelligence in Image-Based Diagnostics of Oncological and Neurological Disorders', \emph{Diagnostics} (e-ISSN 2075-4418) \hfill closed Dec. 2021
\item Guest Editor of the Special Issue `Texture and Colour in Image Analysis', \emph{Applied Sciences} (e-ISSN: 2076-3417) \hfill closed~ Apr.~2020
\item Reviewer for: \\
\emph{Applications in Engineering Science} (3 manuscripts revised);
\emph{Applied Mathematics and Computation} (2);
\emph{Algorithms} (4),
\emph{Applied Sciences} (13),
\emph{Archaeometry} (1),
\emph{Automation in Construction} (3);
\emph{Autosoft Journal} (2),
\emph{Bioengineering} (2),
\emph{Biomedicines} (1),
\emph{Biomecules \& Biomedicine} (1),
\emph{Biosystems Engineering} (2),
\emph{BMC Cancer} (1),
\emph{BMC Medical Imaging} (7),
\emph{Cancer Imaging} (3),
\emph{Cancer Investigation} (1),
\emph{Cancer Medicine} (2),
\emph{Cancer Management and Research} (1),
\emph{Cancers} (5),
\emph{Clinical and Translational Imaging} (3),
\emph{Clinical Lung Cancer} (1),
\emph{Computers and Electronics in Agriculture} (1),
\emph{Computers in Industry} (2),
\emph{Computer Methods and Programs in Biomedicine} (3),
\emph{Concurrency and Computation: Practice and Experience} (1),
\emph{Data in Brief} (1),
\emph{Diagnostics} (3),
\emph{Digital Signal Processing} (4),
\emph{Dyna-Colombia} (1),
\emph{Ecological Informatics} (1),
\emph{Electronics} (3),
\emph{Energy and Buildings} (1),
\emph{Entropy} (2),
\emph{Engineering Computations} (1),
\emph{Expert Review of Medical Devices} (2),
\emph{Expert Systems With Applications} (11),
\emph{EURASIP Journal on Image and Video Processing} (1),
\emph{European Journal of Nuclear Medicine and Molecular Imaging} (1),
\emph{European Radiology} (2),
\emph{Fibers and Polymers} (1),
\emph{Food Science and Applied Biotechnology} (1),
\emph{Frontiers in Medicine} (1),
\emph{Frontiers in Oncology} (2),
\emph{Future Generation Computer Systems} (1),
\emph{IEEE Access} (1),
\emph{IEEE Journal of Biomedical and Health Informatics} (1),
\emph{IEEE Signal Processing Letters} (2),
\emph{IEEE Transactions on Circuits and Systems for Video Technology} (1),
\emph{IEEE Transactions on Emerging Topics in Computational Intelligence} (1),
\emph{IEEE Transactions on Image Processing} (19),
\emph{IEEE Transactions on Medical Imaging} (1),
\emph{IEEE Transactions on Multimedia} (2),
\emph{IEEE Transactions on Signal Processing} (1),
\emph{IET Image Processing} (2),
\emph{IET Signal Processing} (2),
\emph{IET Computer Vision} (2),
\emph{Information} (1),
\emph{Información Tecnológica} (1),
\emph{Integrated Computer-aided Engineering} (1),
\emph{Intelligent Automation and Soft Computing} (1),
\emph{International Journal of Computer Applications in Technology} (1),
\emph{International Journal of Computer Vision} (1);
\emph{International Journal of Continuing Engineering Education and Life-Long Learning} (1),
\emph{International Journal of Cosmetic Science} (1),
\emph{International Journal on Interactive Design and Manufacturing} (3)
\emph{International Journal of Multimedia Information Retrieval} (1),
\emph{International Journal of Neural Systems} (2),
\emph{Journal of Applied Remote Sensing} (1),
\emph{Journal of Cancer Research and Clinical Oncology} (1),
\emph{Journal of Computational Methods in Sciences and Engineering} (1),
\emph{Journal of Computer Assisted Radiology and Surgery} (1),
\emph{Journal of Digital Imaging} (1),
\emph{Journal of Electronic Imaging} (9),
\emph{Journal of King Saud University} (1),
\emph{Journal of Imaging} (8),
\emph{Journal of Imaging Science and Technology} (1),
\emph{Journal of Medical Imaging} (1),
\emph{Journal of Medical Imaging and Health Informatics} (9),
\emph{Journal of the Optical Society of America -- A} (1),
\emph{Journal of Visualization} (3),
\emph{Journal on Computing and Cultural Heritage} (1),
\emph{Knowledge-Based Systems} (3),
\emph{Life} (1),
\emph{Machine Vision and Applications} (1),
\emph{Measurement} (2),
\emph{Medical Image Analysis} (2),
\emph{Microscopy Research \& Technique} (1),
\emph{Modelling and Simulation in Engineering} (2);
\emph{Molecular Imaging and Biology} (2),
\emph{Multidimensional Systems and Signal Processing} (7),
\emph{Nanomaterials} (1),
\emph{Neurocomputing} (1),
\emph{Optical Engineering} (4),
\emph{Optics and Lasers in Engineering} (7),
\emph{Optik - International Journal for Light and Electron Optics} (1),
\emph{Opto-Electronics Review} (1),
\emph{Pattern Analysis and Applications} (1),
\emph{Pattern Recognition} (11),
\emph{Pattern Recognition Letters} (9),
\emph{PeerJ Computer Science} (3),
\emph{Photogrammetric Engineering and Remote Sensing} (2),
\emph{PlosONE} (6),
\emph{Quantitative Imaging in Medicine and Surgery} (4),
\emph{Radiation Oncology} (1),
\emph{Remote Sensing} (3),
\emph{Respiratory Research} (1),
\emph{Scientific Reports} (4),
\emph{Signal Processing} (1),
\emph{SN Applied Sciences} (2),
\emph{Surfaces \& Coatings Technology} (1),
\emph{Sensors} (9),
\emph{Solar Energy Materials \& Solar Cells} (1),
\emph{Superficies y Vacío} (1),
\emph{Symmetry} (4),
\emph{Technologies} (2),
\emph{Textile Research Journal} (1),
\emph{Theranostics} (1),
\emph{Translational lung cancer research} (3),
\emph{Turkish Journal of Agriculture and Forestry} (1).
\item MDPI Cancers -- Exceptional Reviewer (Q4, 2024)
\end{itemize}
\section*{Participation in the organisation of scientific events}
\subsection*{Organising committees}
\begin{itemize}
\item The 6$^\text{th}$ International Conference on Control, Automation and Diagnosis (ICCAD'22); Lisbon, Portugal. Role: co-publication chair \hfill Jul. 2022
\item The 5$^\text{th}$ International Conference on Control, Automation and Diagnosis (ICCAD'20); Paris, France. Role: co-publication chair \hfill Oct. 2020
\item \emph{Texture Analysis, Classification and Retrieval (TAILOR)}. Workshop within the 25$^\text{th}$ International Conference on Pattern Recognition (ICPR); Milan, Italy. Role: workshop organiser \hfill Jan. 2021
\item \emph{Processing visual data in intelligent systems: methods and applications}. Special track within the 10$^\text{th}$ KES International Conference on Intelligent Interactive Multimedia: Systems and Services; Vilamoura, Portugal. Role: session organizer and chair \hfill Jun. 2017
\end{itemize}
\subsection*{Scientific and programme committees}
\begin{itemize}
\item Heritechne Conference 2026
\item EG-ICE International Workshop on Intelligent Computing in Engineering 2025
\item International Conference on Image Processing and Vision Engineering (IMPROVE 2024, IMPROVE 2025)
\item International Conference on Frontiers of Digital Signal Processing (CFDSP 2023)
\item International Symposium on Mathematical and Computational Oncology, Virtual (ISMCO'21)
\item International Conference on Computer Graphics and Digital Image Processing (CGDIP 2020, CGDIP 2021)
\item International Conference on Frontiers of Digital Signal Processing (CFDSP 2021)
\item The International Conference on Control, Automation and Diagnosis (ICCAD'20, ICCAD'21 -- co-publication chair, ICCAD'23, ICCAD'24 and ICCAD'25 -- co-special session chair)
\item First International Symposium on Information and Future Technologies (ISIFut 2020)
\item 15$^\text{th}$ European Congress on Digital Pathology (ECDP 2019)
\item 4$^\text{th}$ International Workshop on Interactive and Spatial Computing (IWISC 2019)
\item KES International Conference on Intelligent Decision Technologies (IDT 2019)
\item International Conference on Advances in Signal Processing and Artificial Intelligence (ASPAI 2019)
\item International Conference on Big Data and Machine Learning (BDML 2018)
\item International Conference Florence Heri-Tech (The future of Heritage Science and technologies, 2018, 2020 and 2022)
\item International Conference on Advances in Image Processing (ICAIP 2018--2019)
\item Computational Color Imaging Workshop (CCIW'17)
\item KES International Conference on Intelligent Interactive Multimedia: Systems and Services (IIMSS-17, IIMSS-18)
\item International Conference on Communication and Information Processing (ICCIP 2016--2020)
\item 1st IEEE Italy Section Summer School – Advanced course for graduated students and industrial research (IEEESS 2015)
\item Knowledge-Based and Intelligent Information \& Engineering Systems (KES 2015--2017)
\item Workshop Colour in Texture and Material Recognition (in conjunction with the 18th Int. Conf. on Image Analysis and Processing – ICIAP 2015)
\item Portuguese Conference on Artificial Intelligence (EPIA 2015)
\item International Conference on Systems (ICONS 2015--2024)
\item International Conference on Modelling, Simulation, and Identification (MSI 2014, MSI 2016)
\item World Conference on Information Systems and Technologies (WorldCIST'13--21)
\item International Conference on Computer Graphics and Imaging (CGIM 2013)
\item Irish Machine Vision and Image Processing Conference (IMVIP 2011, IMVIP 2014--2023)
\item Imaging and Signal Processing in Healthcare and Technology (ISPHT 2011)
\item Computational Photography (CPhoto 2011)
\item Visualization Imaging and Image Processing (VIIP 2007--2009 and VIIP 2012)
\item International Conference on Information Visualization (IV07--10, IV2011, IV2012, IV2013, IV2015 and IV2016)
\item Applied Simulation and Modelling (ASM 2008, ASM 2009 and ASM 2012)
\item International Joint Congress XVI ADM -- XIX INGEGRAF (2007)
\end{itemize}
\subsection*{Other}
\begin{itemize}
\item Webinar on \emph{AI-radiomica su PET dinamica: verso una medicina di precisione nella distinzione infiammazione-neoplasia} [AI-radiomics on dynamic PET: towards precision medicine for differentiating inflammation vs. malignancy], the Italian Society of Nuclear Medicine and Molecular Imaging, 25 Feb. 2026 \hfill Role: moderator
\item Webinar on \emph{Intelligenza artificiale e PET nella diagnosi e gestione clinica delle vasculiti: nuove frontiere per la medicina} [Artificial Intelligence and PET for the diagnosis and clinical management of vasculitis: new frontiers for medicine], the Italian Society of Nuclear Medicine and Molecular Imaging, 12 Nov. 2025 \hfill Role: moderator
\item ADM 2025 International Conference \hfill Role: reviewer
\item ADM 2024 International Conference \hfill Role: reviewer and session chair
\item The 27$^\text{th}$ International Conference on Pattern Recognition (ICPR 2024) \hfill Role: reviewer
\item ADM 2023 International Conference \hfill Role: reviewer and session chair
\item International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2022) \hfill Role: reviewer and session chair
\end{itemize}
\section*{Advisory and evaluation}
\begin{itemize}
\item Member of the final evaluation committee for the degree of Doctor of Philosophy, Inter-university Doctoral Programme in Bioengineering and Medical-Surgical Sciences, Politecnico di Torino, Italy \\ \mbox{} \hfill May 2026
\item Member of the final evaluation committee for the degree of Doctor of Philosophy, Doctoral programme in Industrial and Information Engineering, Università degli Studi di Perugia, Italy \\ \mbox{} \hfill Apr. 2026
\item External reviewer for PhD dissertation, Inter-university Doctoral Programme in Bioengineering and Medical-Surgical Sciences, Politecnico di Torino, Università di Torino, Italy \hfill Jan. 2026
\item Member of the final evaluation committee for the degree of Doctor of Philosophy, Doctoral programme in Artificial Intelligence, Politecnico di Torino, Italy \hfill Jun. 2025
\item Reviewer for Proyectos Sinérgicos I+D 2024, Comunidad de Madrid, Spain \hfill May 2025
\item External reviewer for PhD dissertation, Doctoral Programme in Aerospace Science and Technology, Università degli Studi di Bologna, Italy \hfill Jan. 2024
\item External reviewer for PhD dissertation, Doctoral Programme in Industrial Engineering, Università degli Studi di Firenze, Florence, Italy \hfill Dec. 2024
\item External reviewer for PhD dissertation, Doctoral programme in Environment Design Innovation, University of Campania `Luigi Vanvitelli', Italy, Sep. 2024 \hfill Sep. 2024
\item External reviewer for PhD dissertation, EIDO International Doctoral School, Universidade de Vigo, Spain \hfill May 2024
\item Member of the final evaluation committee for the degree of Doctor of Philosophy, Department of Industrial Engineering, Università degli Sudi di Firenze, Italy \hfill Apr. 2024
\item Member of the final evaluation committee for the degree of Doctor of Philosophy, department of Industrial and Information Engineering, Università di Pavia, Italy \hfill Mar. 2024
\item External reviewer for PhD dissertation, EIDO International Doctoral School, Universidade de Vigo, Spain \hfill Mar. 2024
\item External reviewer for PhD dissertation, Doctoral Programme in Industrial Engineering, Università degli Studi di Firenze, Florence, Italy \hfill Dec. 2023
\item External reviewer for PhD dissertation, International Doctoral School, Universidade de Vigo, Spain \hfill November 2023
\item External reviewer for PhD dissertation, Department of Informatics, Systems and Communications, Università degli Studi di Milano-Bicocca Milan, Italy \hfill Nov. 2023
\item Member of the final evaluation committee for the degree of Doctor of Philosophy, International Doctoral School, Universidade de Vigo, Spain \hfill Feb. 2023
\item External reviewer for PhD dissertation, International Doctoral School, Universidade de Vigo, Spain \hfill April 2022
\item Member of the final evaluation committee for the degree of Philosophiae Doctor, Faculty of Information Technology and Electrical Engineering, Norges Teknisk-Naturvitenskapelige Universitet (NTNU), Gjøvik, Norway \hfill Jan. 2022
\item External reviewer for PhD dissertation, Department of Informatics, Systems and Communications, Università degli Studi di Milano-Bicocca Milan, Italy, \hfill Nov. 2021
\item External reviewer for the Italian Ministry for University and Research, National Research Projects (PRIN) call 2020 \hfill May-Sep. 2021
\item External reviewer for PhD dissertation, School of Electronic Engineering and Computer Science, Queen Mary University of London, United Kingdom \hfill May 2020
\item External reviewer for PhD dissertation, Anna University, Chennai, India \hfill Feb. 2020
\item External referee for academic promotions at London South Bank University, United Kingdom \\ \mbox{} \hfill Feb. 2020
\item External reviewer for PhD dissertation, University of Florence, Italy \hfill Dec. 2019
\item Head of the evaluation panel for Fondimpresa Lifelong Learning projects (`Technology and/or digital innovation' call 4/2018), Rome, Italy \hfill Mar.--Sep. 2019
\item External reviewer for the Young Reseachers Programme ‘Rita Levi Montalcini’, Italian Ministry of Education \hfill 2016
\item Member of the final evaluation committee for the degree of Doctor of Philosophy, International Doctoral Programme, University of Vigo, Spain \hfill Jul. 2019
\item Member of the final evaluation committee for the degree of Doctor of Philosophy, Department of Engineering, University of Almería, Spain \hfill Jul. 2013
\item Member of the final evaluation committee for the degree of Doctor of Philosophy, Department of Mining and Environmental Engineering, University of Vigo, Spain \hfill Jul. 2011
\item Member of the final evaluation committee for the degree of Doctor of Philosophy, Faculty of Sciences, University of Vigo, Spain \hfill Mar. 2010
\end{itemize}
\section*{Honours and awards}
\begin{itemize}
\item Best paper award: G. Pascoletti, C. Di Natali, M. Sposito, G. Franceschini, F. Bianconi and E.M. Zanetti; A multibody model of the exoskeleton-human body system for ergonomic design, ADM2024 International Conference, Palermo, Italy \hfill Sep. 2024
\item First Prize: S. Cascianelli, C. Tranfaglia, M.L. Fravolini, F. Bianconi, M. Minestrini, S. Nuvoli, N. Tambasco, M.E. Dottorini and B. Palumbo; \emph{Right putamen and age are the most discriminant features to diagnose Parkinson's disease by using 123I-FP-CIT brain SPECT data by using an artificial neural network classifier, a classification tree (ClT)}, 4$^\text{th}$ International Medical Olympiad; Thessaloniki, Greece \hfill Nov. 2017
\item Best paper award: R. Bello-Cerezo, F. Bianconi, S. Cascianelli, F. Di Maria, M. Fravolini and F. Smeraldi; \emph{Hand-designed local image descriptors vs. off -the-shelf CNN-based features for texture classification: an experimental comparison}, 9$^\text{th}$ International Conference on Intelligent Interactive Multimedia: Systems and Services; Vilamoura, Portugal \hfill Jun. 2017
\item Best paper award: M.J. Álvarez, A. Fernández, E. González, F. Bianconi, F.J. Aguilar and J. Armesto; \emph{Image segmentation using multilayer Coordinated Cluster Representation}, International Joint Congress XXI INGEGRAF - XVII ADM; Lugo, Spain \hfill Jun. 2009
\end{itemize}
\section*{Patents and inventions}
\begin{itemize}
\item IT patent no. 1413266: \emph{Apparatus to acquire a plurality of superficial images of at least one body and related method}. Assignee: Mondial Marmi S.r.l.; inventors: F. Bianconi, S.A. Saetta, A. Fernández and E. González \hfill 2015.
\end{itemize}
\section*{Publications}
\subsection*{Selected (sorted by date, newest first)}
\begin{itemize}[label={}]
\item \bibentry{Bianconi2019}
\item \bibentry{Bianconi2019a}
\item \bibentry{Bianconi2019c}
\item \bibentry{Kather2016}
\item \bibentry{Bianconi2011a}
\item \bibentry{Bianconi2011}
\end{itemize}
\subsection*{Books}
\begin{enumerate}[label={[\arabic*]}]
\item \bibentry{Bianconi2024a}
\end{enumerate}
\subsection*{Edited books}
\begin{enumerate}[label={[\arabic*]}]
\item \bibentry{ColourTextureBook-2021}
\end{enumerate}
\subsection*{Book chapters}
\begin{enumerate}[label={[\arabic*]}]
\item \bibentry{Springer-BookChapter-2014}
\item \bibentry{Springer-ISRL-2020}
\end{enumerate}
\subsection*{Journal papers}
\begin{enumerate}[label={[\arabic*]}]
\item \bibentry{Scialpi2026}
\item \bibentry{Filippi2026a}
\item \bibentry{Filippi2026}
\item \bibentry{Palumbo2025}
\item \bibentry{Marongiu2025}
\item \bibentry{Bianconi2025}
\item \bibentry{Pascoletti2025a}
\item \bibentry{Filippi2025a}
\item \bibentry{Bagni2025}
\item \bibentry{Filippi2025}
\item \bibentry{Filippi2024}
\item \bibentry{Bianconi2024c}
\item \bibentry{Irshad2024}
\item \bibentry{Bianconi2023a}
\item \bibentry{Buchicchio2023}
\item \bibentry{Evangelista2023}
\item \bibentry{Bianconi2023}
\item \bibentry{Filippi2023}
\item \bibentry{Buchicchio2022b}
\item \bibentry{Buchicchio2022a}
\item \bibentry{Nuvoli2022}
\item \bibentry{Nuvoli2022a}
\item \bibentry{Buchicchio2022}
\item \bibentry{Bianconi2022a}
\item \bibentry{Filippi2022}
\item \bibentry{Palumbo2022}
\item \bibentry{Bianconi2022}
\item \bibentry{Bianconi2021e}
\item \bibentry{Chirikhina2021}
\item \bibentry{Palumbo2021}
\item \bibentry{Bianconi2021b}
\item \bibentry{Bianconi2021}
\item \bibentry{Bianconi2021c}
\item \bibentry{Palumbo2021a}
\item \bibentry{Bianconi2020b}
\item \bibentry{Palumbo2020}
\item \bibentry{Chirikhina2020}
\item \bibentry{Buratti2020}
\item \bibentry{Palumbo2020a}
\item \bibentry{Nuvoli2020}
\item \bibentry{Bianconi2020}
\item \bibentry{Smeraldi2020}
\item \bibentry{Bianconi2019}
\item \bibentry{Bianconi2019a}
\item \bibentry{Scialpi2019}
\item \bibentry{Bianconi2019c}
\item \bibentry{Bianconi2018a}
\item \bibentry{Bianconi2018b}
\item \bibentry{Cascianelli2017}
\item \bibentry{Bianconi2017}
\item \bibentry{DiMaria2017}
\item \bibentry{BelloCerezo2016}
\item \bibentry{Gonzalez2016}
\item \bibentry{Kather2016}
\item \bibentry{Aguilar2016}
\item \bibentry{DiMaria2016}
\item \bibentry{Bianconi2015}
\item \bibentry{Bianconi2015a}
\item \bibentry{Postrioti2015}
\item \bibentry{Bianconi2015b}
\item \bibentry{Gonzalez2014}
\item \bibentry{Bianconi2014}
\item \bibentry{Bianconi2014a}
\item \bibentry{Bianconi2014b}
\item \bibentry{Aguilar2014}
\item \bibentry{Caldarelli2014}
\item \bibentry{Gonzalez2013}
\item \bibentry{Bianconi2013}
\item \bibentry{Fernandez2013}
\item \bibentry{Bianconi2012}
\item \bibentry{Fernandez2011}
\item \bibentry{Bianconi2011}
\item \bibentry{Bianconi2011a}
\item \bibentry{Fernandez2011a}
\item \bibentry{Alvarez2010}
\item \bibentry{Alvarez2010a}
\item \bibentry{Gonzalez2010}
\item \bibentry{Bianconi2009}
\item \bibentry{Bianconi2009a}
\item \bibentry{Bianconi2007b}
\item \bibentry{Bianconi2006a}
\item \bibentry{DiStefano2004}
\item \bibentry{Bianconi2002}
\end{enumerate}
\subsection*{Conference proceedings}
\begin{enumerate}[label={[\arabic*]}]
\item \bibentry{Bianconi2026}
\item \bibentry{Pascoletti2026}
\item \bibentry{Fernandez2026}
\item \bibentry{Khan2025}
\item \bibentry{Pascoletti2025}
\item \bibentry{Bianconi2024b}
\item \bibentry{Khan2024}
\item \bibentry{Bianconi2024}
\item \bibentry{Cali2024}
\item \bibentry{Bianconi2023b}
\item \bibentry{Bianconi2022b}
\item \bibentry{Bianconi2022c}
\item \bibentry{Pascoletti2022}
\item \bibentry{Bianconi2020a}
\item \bibentry{Bianconi:2019c}
\item \bibentry{BelloCerezo2019}
\item \bibentry{Bianconi2019b}
\item \bibentry{BelloCerezo2018}
\item \bibentry{Abdollahyan2018}
\item \bibentry{Bianconi2018}
\item \bibentry{BelloCerezo2018a}
\item \bibentry{Cascianelli2018}
\item \bibentry{Fernandez2017}
\item \bibentry{Bianconi2017a}
\item \bibentry{Bianconi2017b}
\item \bibentry{PardoBalado2015}
\item \bibentry{Bianconi2015c}
\item \bibentry{Ceccarelli2013}
\item \bibentry{Harrison2011}
\item \bibentry{Bianconi2008}
\item \bibentry{Moroni2007}
\item \bibentry{Bianconi2007}
\item \bibentry{Bianconi2007a}
\item \bibentry{Bianconi2006}
\item \bibentry{Bianconi2006b}
\item \bibentry{Bianconi2005}
\item \bibentry{Bianconi2005a}
\item \bibentry{Argento2004}
\item \bibentry{Bianconi2003}
\item \bibentry{Bianconi2003a}
\item \bibentry{Bianconi2002a}
\end{enumerate}
\section*{Memberships \& professional affiliations}
\begin{itemize}
\item Member of the Italian Society of Nuclear Medicine and Molecular Imaging \mbox{} \hfill 2023--present
\item Member of the Applied Geotechnologies Research Group (`TF1') at the Universdade de Vigo, Spain \mbox{} \hfill 2023--present
\item Member of the research group \emph{Gestión integrada del territorio y tecnologías de la información espacial} at the Universidad de Almería, Spain \mbox{} \hfill 2015--present
\item Senior Member of the Institute of Electrical and Electronics Engineers (IEEE) \mbox{} \hfill 2013--present
\item Member of the Institute of Electrical and Electronics Engineers (IEEE) \mbox{} \hfill 2000--2013
\item Court-appointed Expert, Perugia Court of Justice, Perugia, Italy \hfill 1998--present
\item Chartered Engineer, Perugia Engineering Council, Perugia, Italy \hfill 1997--present
\end{itemize}
\bibliographystyle{unsrt}
\nobibliography{publications}
\end{document}Preview
PDF Preview
Create an account to compile and preview