Tcd Phd Thesis

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%
%%% File: utthesis2.doc, version 2.0jab, February 2002
%%%
%%% Based on: utthesis.doc, version 2.0, January 1995
%%% =============================================
%%% Copyright (c) 1995 by Dinesh Das.  All rights reserved.
%%% This file is free and can be modified or distributed as long as
%%% you meet the following conditions:
%%%
%%% (1) This copyright notice is kept intact on all modified copies.
%%% (2) If you modify this file, you MUST NOT use the original file name.
%%%
%%% This file contains a template that can be used with the package
%%% utthesis.sty and LaTeX2e to produce a thesis that meets the requirements
%%% of the Graduate School of The University of Texas at Austin.
%%%
%%% All of the commands defined by utthesis.sty have default values (see
%%% the file utthesis.sty for these values).  Thus, theoretically, you
%%% don't need to define values for any of them; you can run this file
%%% through LaTeX2e and produce an acceptable thesis, without any text.
%%% However, you probably want to set at least some of the macros (like
%%% \thesisauthor).  In that case, replace "..." with appropriate values,
%%% and uncomment the line (by removing the leading %'s).
%%%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

\documentclass[a4paper, 11pt, oneside]{report}         %% LaTeX2e document.
\usepackage {tcdthesis}              %% Preamble.

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%MYPACKAGES
\usepackage{graphicx}
%\usepackage{hyperref}
%\usepackage[disable]{todonotes} !!!! UNCOMMENT THIS BEFORE SENDING FOR REVIEW
\usepackage{todonotes}

% This is for the line in top of chapter
\usepackage{fancyhdr}

\usepackage{amsmath}
\usepackage{algorithm,algorithmic}

% Load the package
\usepackage[acronym,style=super,nonumberlist,toc]{glossaries}

% This is to break long citations
\usepackage{breakcites}
 
% Generate the glossary
\makenoidxglossaries


%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

%\mastersthesis                     %% Uncomment one of these; if you don't
\phdthesis                         %% use either, the default is \phdthesis.

%\thesisdraft                      %% Uncomment this if you want a draft
                                     %% version; this will print a timestamp
                                     %% on each page of your thesis.

\leftchapter                       %% Uncomment one of these if you want
%\centerchapter                      %% left-justified, centered or
%\rightchapter                       %% right-justified chapter headings.
                                     %% Chapter headings includes the
                                     %% Contents, Acknowledgments, Lists
                                     %% of Tables and Figures and the Vita.
                                     %% The default is \centerchapter.

% \singlespace                       %% Uncomment one of these if you want
\oneandhalfspace                   %% single-spacing, space-and-a-half
% \doublespace                       %% or double-spacing; the default is
                                     %% \oneandhalfspace, which is the
                                     %% minimum spacing accepted by the
                                     %% Graduate School.

\renewcommand{\thesisauthor}{Bart Simpson}  %% Your official UT name.
\renewcommand{\thesismonth}{October}       %% Your month of graduation.
\renewcommand{\thesisyear}{2018}             %% Your year of graduation.
\renewcommand{\thesistitle}{This is a very long title}      %% The title of your thesis; use mixed-case.
\renewcommand{\thesisauthorpreviousdegrees}{}  %% Your previous degrees, abbreviated; separate multiple degrees by commas.
\renewcommand{\thesissupervisor}{Homer Simpson}     %% Your thesis supervisor; use mixed-case and don't use any titles or degrees.
% \renewcommand{\thesiscosupervisor}{}                %% Your PhD. thesis co-supervisor; if any.

% \renewcommand{\thesiscommitteemembera}{}
% \renewcommand{\thesiscommitteememberb}{}
% \renewcommand{\thesiscommitteememberc}{}
% \renewcommand{\thesiscommitteememberd}{}
% \renewcommand{\thesiscommitteemembere}{}
% \renewcommand{\thesiscommitteememberf}{}
% \renewcommand{\thesiscommitteememberg}{}
% \renewcommand{\thesiscommitteememberh}{}
% \renewcommand{\thesiscommitteememberi}{}

\renewcommand{\thesisauthoraddress}{Dublin, Ireland}
\renewcommand{\thesisdedication}{}     %% Your dedication, if you have one; use "\\" for linebreaks.
\renewcommand{\baselinestretch}{1.5}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%
%%% The following commands are all optional, but useful if your requirements
%%% are different from the default values in utthesis.sty.  To use them,
%%% simply uncomment (remove the leading %) the line(s).

% \renewcommand{\thesiscommitteesize}{...}
                                     %% Uncomment this only if your thesis
                                     %% committee does NOT have 5 members
                                     %% for \phdthesis or 2 for \mastersthesis.
                                     %% Replace the "..." with the correct
                                     %% number of members.

% \renewcommand{\thesisdegree}{...}  %% Uncomment this only if your thesis
                                     %% degree is NOT "DOCTOR OF PHILOSOPHY"
                                     %% for \phdthesis or "MASTER OF ARTS"
                                     %% for \mastersthesis.  Provide the
                                     %% correct FULL OFFICIAL name of
                                     %% the degree.

% \renewcommand{\thesisdegreeabbreviation}{...}
                                     %% Use this if you also use the above
                                     %% command; provide the OFFICIAL
                                     %% abbreviation of your thesis degree.

% \renewcommand{\thesistype}{...}    %% Use this ONLY if your thesis type
                                     %% is NOT "Dissertation" for \phdthesis
                                     %% or "Thesis" for \mastersthesis.
                                     %% Provide the OFFICIAL type of the
                                     %% thesis; use mixed-case.

% \renewcommand{\thesistypist}{...}  %% Use this to specify the name of
                                     %% the thesis typist if it is anything
                                     %% other than "the author".

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

\usepackage{subcaption}

\pagestyle{fancy}
\fancyhf{}
%\fancyhead[EL]{\nouppercase\leftmark}
\fancyhead[LO]{\itshape\nouppercase{\leftmark}}
\fancyhead[RO,LE]{\thepage}

% Separate file to fine all the acronyms
\input{extra/acronyms}

\hyphenation{op-ti-mi-sa-tion}

\begin{document}                                  

\thesistitlepage                      %% Generate the title page.
\thesisdeclarationpage				  %% Generate the declaration page.
\thesispermissionpage				  %% Generate the copyright permission page
\thesisdedicationpage                 %% Generate the dedication page.


\input{extra/acknowledgements}


\include{abstract}



\tableofcontents                                  %% Generate table of contents.
\listoftables                                     %% Uncomment this to generate list of tables.
\listoffigures                                    %% Uncomment this to generate list of figures.


\printnoidxglossary[type=\acronymtype,title={List of Abbreviations}]

% UNCOMMENT THIS !!!!!!!!!!!!!!!
%\input{extra/relatedpublications}

% COMMENT THIS !!!!!!!!!!!!!!!
%\todototoc
% COMMENT THIS !!!!!!!!!!!!!!!
%\listoftodos


%% Include thesis chapters here
\include{chapter1} %introduction    			                      
\include{chapter2} %state of the art                              
\include{chapter3} %design							
\include{chapter4} %implementation			
\include{chapter5} %evaluation					
\include{chapter6} %conclusion					


% UNCOMMENT THIS IF YOU HAVE APPENDICES !!!
%\addcontentsline {toc}{chapter}{Appendices}       %% Force Appendices to appear in contents
%\begin{appendix}
%\include{appendix1}
% include{appendix2}
%\end{appendix}


%\addcontentsline {toc}{chapter}{Bibliography}     %% Force Bibliography to appear in contents
%\bibliographystyle{ieeetr}  %% Start your bibliography here; you can

\bibliographystyle{apalike}  		%<---REMOVE COMMENT
\bibliography{ref}          			%<---REMOVE COMMENT
%% also use the \bibliography command to generate your bibliography.


\end{document}